Breezaire WKL1060BLK 14-inch Advanced Cooling Technology Bottle Probe with 140 cu. ft. Capacity, Cool Green Display, Easy to Read, Sentry III+ Control System (Black)

This is the advanced system of choice for standard applications ranging from under 100 to 2000 cubic feet. WKL Series systems are compact, self-contained units. Our performance speaks for itself. This series is equipped with the Sentry III+ control system. Sentry III+ control system offers the following features: Large, easy-to-read, cool green display. Accurate, easy to adjust temperature set points with continuous display of cabinet temperature.Power outage protection. Blocked airflow protection shuts down the unit and protects the wine in case of high temperatures caused by condenser blockage or fan failure. Controls temperature by enclosure (cellar) air sensors or optional bottle probe.  Units are shipped from the factory fully charged and ready for use when mounted on a wall and connected to a 115V AC voltage source.

Features:

• Sentry III+ control system offers the following features:
• Large, easy to read, cool green display.
• Accurate, easy to adjust temperature set points with continuous display of cabinet temperature.
• Marlec air conditioner unit`
• Three beige room air conditioners.
• Black electronic device with vents and power cord.
• Breezaire evaporative cooler control panel.
• Power outage protection. Blocked airflow protection, which shuts down unit and protects wine in case of high temperatures caused by condenser blockage or fan failure. Controls temperature by enclosure (cellar) air sensors or optional bottle probe.  Units are shipped from the factory fully charged and ready for use when mounted in a wall and connected to 115 AC volt source.

Unit Modification & Upgrades:

All factory modifications will have a longer lead time, a modification up-charge, and may not be cancelled or returned.

• The 2200 through 8000 models are manufactured with the hot air out the rear (standard) or out the top of the unit (special order).
• All six models come with the electric cord out the front (standard) or can be routed out the rear (special order).
• The 2200 through 8000 models can have the cold air routed out the front top Cold Air out the top. (CAT)
  

All WKL models have a drain tube located in the base of the unit on the cold side.

​

Breezaire can install a drain fitting on the rear of the unit. (RDF Rear Drain Fitting)

The drain fitting is for the removal of condensate. Connect a ½ inch I.D. vinyl hose to the fitting and route the hose to an approved drain. Ensure the ½ inch I.D. vinyl hose has an air break installed within 2 to 10 inches from the unit connection. A condensate pump is required if the vinyl drain hose has any vertical rise, significant horizontal or near horizontal run.

Located on the lower left-hand side of the rear of the unit.